Citrox Protect Floors & Walls Sealant for Non-Absorbent Surfaces is formulated to bond effectively to smooth materials where conventional coatings often fail. The nano-coating forms a transparent, protective barrier that resists contamination while allowing trapped vapour to escape.

Ideal for high-traffic and exposed environments, it helps maintain surface appearance and performance with less frequent cleaning and reduced maintenance effort.

PACKAGING: Widely Recyclable

Isopropanol, Citrus Extract, Polymer (silane-based).

APPLICATION: Wear gloves, ensuring good ventilation during application and drying. Polymerization will take place in 24 hours.

STEP 1: Clean the surface to be coated.

STEP 2: Apply the sealant to a clean lint free or soft cotton cloth and polish the surface in a circular motion ensuring that all areas are lightly coated.

STEP 3: Allow the treated surface to dry, this should be within 5 to 20 minutes. Protect area until dry.

• Highly flammable liquid and vapour. Avoid contact with eyes. Causes serious eye irritation. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF SWALLOWED: Rinse mouth.
• DO NOT induce vomiting. If symptoms persist seek medical advice immediately. Vapour may cause drowsiness or dizziness.
• Always read the label and product information before use. Keep container tightly closed.
• Store in a dry, well-ventilated place, in a temperature range between 5 – 25ºC.
• Keep away from direct sunlight, heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Dispose of as per local regulations, and do not allow product to enter drains.
• Keep out of the reach of children.