Citrox Protect Solar Panel Shield 500ml

High-performance nano-sealant designed to boost solar panel output and reduce maintenance, suitable for all types of residential, commercial, and industrial systems.

  • Boosts energy output by up to 10%*
  • Hydrophobic coating repels water, dirt, and environmental contaminants
  • Enhances sunlight absorption and low-light efficiency
  • Quick spray-on application — no rubbing or polishing required
  • Polymerises within 30 minutes to form a transparent nano-seal
  • Reduces cleaning frequency and manual labour costs
  • Eco-friendly formulation with patented CITROX® complex
  • Durable protection for up to 12 months
  • 500ml covers up to 30m² of panel surface
  • Made in Germany

*see Testing and Certification for details 

 

Trade Pricing: Request a B2B Quote
Personal Use: Buy Now

£50.00

PRODUCT COMPLIES WITH:
NA

Citrox Protect Solar Panel Shield is a next-generation spray-on nano-sealant that significantly improves solar panel performance. Made from natural bioflavonoids, it forms a transparent, hydrophobic layer that enhances light refraction, repels dirt and water, and helps panels operate more efficiently in all weather conditions. A single 500ml bottle covers up to 30m², making it ideal for residential and small-scale commercial installations.

Backed by the independent studies, the coating demonstrated immediate and sustained energy gains of up to 10%, even in low-light conditions. Its anti-soiling and UV-resistant properties reduce the need for frequent cleaning and extend the panel lifespan. Ideal for both new and existing solar installations.

PACKAGING: Widely Recyclable

2-Propanol, Polymer (silane-based), mixture of fruit acids and bioflavonoids.

APPLICATION: Wear gloves and ensure adequate ventilation during application and drying.

STEP 1: Ensure surfaces are clean, dry, and grease-free.

STEP 2: Apply the sealant evenly using the included sprayer or a similar tool, applying 10–20 ml per square metre for optimal coverage.

STEP 3: Allow at least 30 minutes drying time for polymerisation to occur. High humidity may extend curing to several hours. Avoid touching or exposing the surface to water or cleaning agents during this time.

STEP 4: Check the polymerisation by performing a drop test: water should bead evenly across the surface rather than forming a continuous film.

STEP 5: If the effect diminishes, repeat the process to restore optimal performance.

  • Highly flammable liquid and vapour.
  • Avoid contact with eyes. Causes serious eye irritation.
  • IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF SWALLOWED: Rinse mouth.
  • DO NOT induce vomiting. If symptoms persist seek medical advice immediately.
  • Vapour may cause drowsiness or dizziness.
  • Always read the label and product information before use. Keep container tightly closed.
  • Store in a dry, well-ventilated place, in a temperature range between 5 – 25ºC.
  • Keep away from direct sunlight, heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • Dispose of as per local regulations, and do not allow product to enter drains.
  • Keep out of the reach of children.

MSDS available upon request.